VAYU2-3G (UMTS/HSPA+, Global bands) w/ GPS

$145.00 USD

Availability:
In Stock
Product Code:
VAYU2-3GUC20-G

Not yet rated Write a review

Ships in 1-2 weeks.
Contact sales@yantrr.com for volume pricing.


Description

3G/HSPA+ 14.4/5.76 Mbps, Built-in GPS, 2x Serial I/O

This new VAYU2-3GUC20-G cape provides 3G/HSPA+ connectivity for data communication all over the world with its global bands support. It meets the ever increasing data throughput requirements in M2M sector, specifically for video, voice-over-IP, and high speed realtime logging applications. The cape includes an integrated GPS/GLONASS receiver for precise location.

  • Global GSM 850/900/1800/1900, WCDMA 850/900/900/1900/2100 bands covering all regions/carriers of the world
  • GPRS, EDGE, 3G/HSPA+ connectivity
  • Up to 14.4 Mbps (DL)/ 5.76 Mbps (UL) speed in WCDMA mode
  • Integrated GPS capability provides standard compliant NMEA based geolocation using GPS/GLONASS systems
  • SMS Send/Receive
  • Push-Push MicroSIM card connector
  • Main and Diversity antennas for enhanced connectivity
  • Stackable BeagleBone header to mount other capes
  • This 3G module is FCC/CE/PTCRB/GCF certified (plus many national approvals)

The cape communicates with Beaglebone over HS USB , utilising its USB host port. To compensate for this used USB port on Beaglebone, we have provided an USB host port on our cape for connecting user devices. The cape is shipped with a mini USB-B to USB-A cable for connectivity to BeagleBone system, while it is mounted on standard BeagleBone header.

We provide full software support for VAYU2-3GUC20-G which includes kernel modules with drivers, Device tree overlays and sample wvdial files.

As an added value for M2M applications, 2x utility UART ports with a robust +/- 15KV ESD protection and +/- 25V receiver voltage tolerance are provided on these capes to overcome the standard BeagleBone UART’s 3.3V level limitation. Standard 3-pin JST connectors are used to connect to UART signals.

Technical Support:

Note:
1. Antennas are not included in the price and must be purchased separately as accessories.

Specification

General
SIM Card 1.8V/3V 6 pin Micro USIM
LEDs Power LED for Modem and GPS module, Netlight/signal LED, GPS Fix LED
Control Interfaces Power on_off and Hard reset for modem and Reset for GPS over GPIOs and push button switches
Antenna SMA Connectors for GSM and GPS antennas
Cape ID Dedicated onboard EEPROM with 2pos Dip switch
Certifications/Approvals CE/ FCC/ IC/ KC/ NCC/ OFCA/ GCF/ PTCRB/ RCM/ SKT/AT&T/ Rogers/ ANATEL/ Vodafone/ TA/ NAL/JATE/TELEC/ DoC_For_Russia
Wireless Modem
Device Type 3G Module
Chip N/A
Network GSM/GPRS/EDGE/WCDMA/HSPA+
Frequency Band 800/850/900/1900/2100MHz@UMTS 850/900/1800/1900MHz@GSM
Data Rate (DL / UL) HSPA+ Max.14.4Mbps (DL)/Max.5.76Mbps (UL) UMTS Max.384Kbps (DL)/Max.384Kbps (UL) EDGE Max.236.8Kbps (DL)/Max.236.8Kbps (UL) GPRS Max.85.6Kbps (DL)/Max.85.6Kbps (UL) CSD 14.4Kbps
Voltage 3.3 ~ 4.3V, 3.8V typ.
BeagleBone Black interface USB 2.0 HS at USB1 host port
Audio Digital Audio through PCM Interface
Connection Interface Point to point protocol -PPP
Software Features AT command set, USSD, SMS
Operating Temperature range -40 °C ~ +85 °C
Integrated GPS
Receiver Qualcomm gpsOne Gen8 with 16 GPS channels and 14 GLONASS channels
Acquisition Sensitivity with LNA : Cold Start -147dBm, Reacquisition -159dBm, Tracking -161dBm
Accuracy @Open Sky <1.5m CEP-50
Time to First Fix 130dBm with XTRA™, Cold Start 22s, Warm Start 3s,Hot Start 2s 130dBm without XTRA™, Cold Start 32s, Warm Start 29s, Hot Start 2.5s Cold Start -147dBm
Message Format NMEA0183 Ver. 3.01 ASCII, as well as proprietary message
Software
OS Distribution Support Debian Jessie, Angstrom Linux, Ubuntu, Android – as Kernel module or Pre compiled image with cape configured
Driver Support Linux device tree overlay files for GPS serial port, USB drivers for 3G module,
Middleware GPS (nmead), 3G (wvdial/ppp)

Reviews (0)

Write a review